Inlab Networks

BalanceNG Home

Certified for Red Hat Enterprise Linux
  • Overview
  • Customer References
  • Features
  • Datasheet
  • Documentation
  • Application Examples
    • 1. Single Legged Routing Mode Example
    • 2. Dual Legged Routing Mode Example
    • 3. Direct Server Return Example (Single Legged)
    • 4. Link Load-Balancing (LLB) Example
    • 5. Direct Server Return Example with Two Single Legged Nodes and VRRP-HA
    • 6. Setting up a dual node Sun X2100 HA load balancing cluster with Apache 2 and BalanceNG
    • 7. A DNS load balanced HA cluster with Bind9 and BalanceNG
    • 8. Location-Based Load Balancing (IPDB/LGRP)
    • 9. Activating Session Table Synchronization with bngsync
    • 10. Implementing a high available tarpit for IPv4 and IPv6 with the tarpit module
    • 11. DSR / Proxy Dual Mode Configuration
    • 12. Server Load-Balancing in SNAT Proxy mode
    • 13. SIP/UDP load-balancing with Call-ID session management
    • 14. IPv6 SLB (Server Load-Balancing) with dual stack NAT
    • 15. IPv6 SLB (Server Load-Balancing) in DSR mode
    • 16. IPv6 SLB (Server Load-Balancing) in DSR mode with agent feedback
    • 17. Implementing an HA Switch with Location based filtering Capabilities
    • 18. Virtual cross-cable connecting two virtual TAP interfaces
    • 19. SNAT Proxy Load Balancing with prx and prx6 directives
  • Installation and Usage
    • Installation + Setup
      • BalanceNG Installation
      • DSR Target Setup
        • Debian Style
    • The bng Command
    • Performance Considerations and Measurements
      • Measuring Internal Bandwidth with iperf
      • Recommended 10Gbit/sec NICs
      • Measuring 10Gbit/sec Load Balancing Performance
      • How to build your own 10GbE Load Balancer
  • Knowledge Base
    • 1. How to deal with ARP-Problems on Linux
    • 2. Important VMware Settings for BalanceNG
    • 3. How to enable the loopback adapter on Windows 2008
    • 4. How to setup the loopback alias for DSR on Windows
    • 5. How to setup wget as an external HTTP health check
    • 6. Using 802.1q VLANs on Linux
    • 7. How to switch off 'failed to write JUMBO frame' warnings
    • 8. How to strip the FCS (Frame Check Sequence) on Solaris e1000g interfaces
    • 9. Setup and Test of the BalanceNG SNMPD interface
    • 10. How to enable SNMP on Windows for CPU-load monitoring with ascript and snmpload.sh
    • 11. How to specifically route back server traffic to the Load Balancer (source routing)
    • 12. How to make the loopback alias permanent in Solaris 10
    • 13. How to identify physical ports with ethtool on Linux
    • 14. Installing BalanceNG from the Thomas-Krenn.AG Debian Repository
    • 15. General BalanceNG upgrade procedure for a dual node HA setup
    • 16. How to upgrade the IP location database
    • 17. Historic BalanceNG Benchmark Results
    • 18. KVM and promiscuous Mode for the Guest Operating Systems
  • Download
  • License Shop
  • License Keyfactory
  • FAQ
  • Support
  • Articles
    • Free and Open Source Load-Balancing Software and Projects
    • Commercial Load-Balancing Hardware (Appliances) and Software
  • About Us
    • Contact
    • Privacy Policy
    • Datenschutzerklärung
    • Widerrufsrecht
    • Impressum (Imprint)

More

  • Inlab Networks Home
  • BalanceNG
  • XDSR
  • EtherTunnel
  • AXPad
  • Inlab Scheme
  • Balance

 

 

Inlab Networks

© 2025 by Inlab Networks GmbH
All Rights Reserved

 

Contact

Privacy Policy

Datenschutzerklärung

Widerrufsrecht

Impressum / Imprint


 

 

IT Security made in Germany
BalanceNG > Tags > 10GbE

10GbE

  • Measuring Internal Bandwidth with iperf
  • Recommended 10Gbit/sec NICs
  • Measuring 10Gbit/sec Load Balancing Performance
  • How to build your own 10GbE Load Balancer